FoSSA(2.0) is an interactive program for assessing stresses and settlements under embankment and footings acting on horizontal ground surfaces. ADAMA Engineering had developed the copyrighted program FoSSA Version 1.0 and licensed it to the US Federal Highway Administration (FHWA) [Link to FHWA website announcing the release of version 1.0]. Version 1.0 has been designated exclusively for use by US State Highway Agencies and by US Federal agencies. ADAMA Engineering offers version 2.0 to the public.
GeoCoPS is an interactive program for the design of geosynthetic tubes. For a given problem, the geometry of the tube and the circumferential and longitudinal required strength of the encapsulating geosynthetic are produced. The computations account for reduction factors related to seam strength, durability, creep and installation damage. Results are obtained by solving a differential equation subjected to design constraints.
MSEW(3.0) is an interactive program for the design and analysis of mechanically stabilized earth walls. It follows the design guidelines of AASHTO98/Demo 82, AASHTO02/FHWA-NHI-00-043, AASHTO07, or NCMA97/98. Note that AASHTO98/02 is based on allowable stress design (ASD) whereas AASHTO07 is based on load resistance factor design (LRFD).
PLAXIS 2D & 3D 大地工程軟體
2D Suite is a PLAXIS Software package which includes PLAXIS 2D V9, Dynamics, and PlaxFlow. It makes up a finite element package intended for the two dimensional analysis of deformation and stability in geotechnical engineering. It is a robust and user-friendly finite element package, developed for Geotechnical Engineering. The 3D Suite package contains the programs 3DTunnel and 3DFoundation. These programs combine to form a 3D geotechnical finite element package especially designed for the three-dimensional analysis of deformation and stability in tunnel & foundation projects.
ReSSA (3.0) is an interactive program used to assess the rotational and translational stability of slopes. It was specially developed to allow for convenient inclusion of horizontally placed reinforcement, thus enabling the design and analysis of mechanically stabilized earth slopes. Reinforcement properties follow AASHTO guidelines. However, the user can override all default values.
STEDwin only - If you do not plan to purchase GSTABL7 v.2, then STEDwin 2.7 is also available separately for working with your current Purdue or PennDOT STABL programs. STEDwin is the smart editor for PCSTABL which runs under Win95, 98, NT, 2000, and XP. It allows on-screen data entry and modification similar to a spreadsheet. STEDwin itself performs no stability analysis but allows the user to concentrate on the engineering aspects of slope stability analysis while it takes care of writing the data files in the format expected by the slope stability analysis program.
TALREN 4 is ideal for checking the stability of geotechnical structures, with or without reinforcements: natural slopes, cut or fill slopes, earth dams or dikes. It takes into account various types of reinforcements such as: anchors and soil nails, piles and micropiles, geotextiles and geogrids, steel and polymer strips.